MKN electric frying pan 3/1 GN | tilting | 20 kW

The Optima 700 series

A heavy-duty series of commercial kitchen appliances with a depth of 700 mm for the catering and hospitality industry. A complete range with over 160 electrical and gas appliances that can be flexibly combined into any conceivable configuration. The special, level-matching coupling strips and drainage channels on both sides of the appliances meet stringent ergonomic and hygiene requirements. The heavy-duty quality and premium design make the Optima 700 series the centerpiece of any kitchen.

Construction:

• Housing and cover made entirely of chrome-nickel steel (material no. 1.4301) / AISI 304
• Visible surfaces with polished and satin finishes, grit size 320
• Buckle-resistant, self-supporting, closed construction with side walls, back wall and bottom
• Cover plate angled 50 mm at the sides at a 90° angle and 40 mm bent upwards at a 90° angle at the rear
• Prepared as standard for mounting height-adjustable device feet or flange feet (optional), 4 castors, 2 rollers (at the rear) and 2 feet (150 mm, at the front)
• The device can optionally be prepared for height-adjustable plinth feet or for mounting on a mounting bridge
• The appliance is fully wired internally for connection to the customer supplied electricity supply with appliance switch in the control panel – all necessary contactors for operation are installed
• Fully piped to meet water requirements for connection to customer supplied water mains (optional water inlet)
• Equipped for media supply via pre-drilled half-cutouts (rear wall left/right bottom, underfloor left/right) including membrane seal for media supply (depending on the amount of media), matching the size of the opening (cutout)
• IPX5 – Protection against water jets

On-site installation requirements

• Electrical power supply
• Connection to the water pipe (for optional water inlet)
• 3/4" cold or hot water connections (for optional water inlet)
• Connection to the sewer system (for optional water inlet)

Effective area:

• Hygienically designed pan made of chrome-nickel steel 1.4404 (AISI 316), suitable for GN containers, rounded corners (R 30), with PowerBlock sandwich baking tray base.
• Pan with integrated liter marking.
• Perfect positioning of the pan minimizes movement of the pouring stream and spillage, allowing the pan to be emptied completely.
• Device with two separately adjustable heating zones.
• Tilting by means of an electrically powered tilt mechanism with manual switch.
• The PowerBlock sandwich baking tray consists of extremely corrosion-resistant 3 mm thick chrome-nickel steel (1.4404) and a 12 mm thick base layer of heat-resistant steel (1.5415) for heat storage.

Operating concept

• The control panel can be detached from the front for easy and cost-efficient access for maintenance.
• MKN black plastic rotary knobs , ergonomically shaped knobs for easy position recognition.
• The relief on the control panel where the buttons are mounted prevents the ingress of liquids.
• Variable temperature control

Lid

• Simple operation system – the lid swivel joint moves smoothly and precisely, the lid opens and closes continuously without interruption.
• Double-walled, thermally insulated lid, wear-resistant, without seal, with a full stainless steel round tubular handle.

Heat

• Surface heating system directly under the ground, flush-mounted
• 8mm aluminium plate for even heat distribution, with precision milled grooves to support the tubular heating elements made of chrome nickel steel for optimal and fast heat transfer
• Individually screwed tubular heating elements allow for easy maintenance